Freight in Minnesota

Moving freight in or out of Minnesota? This guide covers the state's 2 intermodal depots, the corridors that run through it and the carriers with capacity there — with live loads and shipment tracking one click away.

State
Minnesota
Intermodal depots
2
Depot cities
Minneapolis, St. Paul
Railroads
BNSF, CP

Planning a run through Minnesota

Transit on a truckload lane is set by hours-of-service rules, not by highway speed. A solo driver covers roughly 500 miles in a legal day once traffic, fuel stops and dock time are taken out of the 14-hour window. The longest lane listed above — Bakersfield to Minneapolis, 1,762 practical miles — works out at 4 driving days, long enough that the 60/70-hour weekly limit and a 34-hour restart usually decide the delivery date.

11-hour driving limit
A driver may drive at most 11 hours after 10 consecutive hours off duty. This is the number that sets a realistic day, not the 14-hour window it sits inside.
14-hour on-duty window
Driving is not permitted beyond the 14th consecutive hour after coming on duty. The window does not pause for breaks, fuel or loading, so time lost at a dock comes out of the driving hours available that day.
30-minute break
A break of at least 30 consecutive minutes is required once 8 cumulative hours of driving have passed without one. Any non-driving status satisfies it.
60/70-hour weekly limit
A driver may not drive after 60 hours on duty in 7 consecutive days, or 70 in 8, depending on whether the carrier operates every day of the week.
34-hour restart
The weekly limit resets after 34 or more consecutive hours off duty. On a long lane this is often what separates a three-day transit from a five-day one.
Adverse driving conditions
The driving limit and the on-duty window may each be extended by up to 2 hours when weather or traffic that could not have been known in advance slows the run.
Short-haul exception
A driver operating within a 150 air-mile radius and returning to the same location within 14 hours is exempt from the electronic logging requirement, which is why local and regional work is scheduled differently from over-the-road.

Summary of 49 CFR Part 395 for property-carrying vehicles, reviewed 2026-09-13. Rules change and exceptions apply by operation type — check the current FMCSA text ↗

Carriers serving Minnesota

Ryder
Ryder
Dedicated · USDOT 16130
J.B. Hunt
J.B. Hunt
Intermodal · USDOT 80806
XPO
XPO
LTL · USDOT 241829
FedEx Freight
FedEx Freight
LTL · USDOT 239039
Swift
Swift
Truckload · USDOT 54283
R+L Carriers
R+L Carriers
LTL · USDOT 63391
Old Dominion
Old Dominion
LTL · USDOT 90849
Schneider
Schneider
Truckload · USDOT 264184

Frequently asked questions

What intermodal depots are in Minnesota? +

Minnesota has 2 inland intermodal ramps, including Minneapolis, MN - Shoreham Yard (Minneapolis), St. Paul, MN - Midway (St. Paul). Each links to the railroads serving it, the equipment it handles and live loads moving through it.

How do I find loads in Minnesota? +

Open any depot on this page for live moves through it, or use TruckScanner's load search to post or find capacity on a specific lane into or out of Minnesota.

Which freight corridors run through Minnesota? +

Busy corridors include Albuquerque → Minneapolis and Allentown → Minneapolis, among others. TruckScanner aggregates carrier capacity on these lanes so you can compare equipment, transit time and rate before you book.